Recherche avancée
recherches apparentées: Bluetooth, Virtual Reality, android, smart phone, mtk, smart watch, Keyboard, OPENBOX Voir tous
Image de Solar Panel + Regulator 10A 100W Solar Battery

Solar Panel + Regulator 10A 100W Solar Battery

SKU: FS9100349
Monocrystalline panels are made of silicon, which has an ordered structure, which results in greater efficiency and performance.
Reproduction is welcome and allowed for free circulation only.
     

Solar Panel + Regulator 10A 100W Solar Battery

Set contains:
100w monocrystalline panel
10A PWM voltage regulator
Solar cable 2 x 3m / 4mm2
MC-4 connector (set)

Monocrystalline panels are made of silicon, which has an ordered structure, which results in greater efficiency and performance. This means that the same energy can be produced in a smaller area. As a result, monocrystalline modules have a slightly higher efficiency than polycrystalline panels. For example, polycrystalline panels have an efficiency of 16%, and monocrystalline panels oscillate around 18%. Due to these properties, they are also slightly more expensive than polycrystalline panels.
The cells of monocrystalline panels range in color from dark blue to black.

USER MANUAL
SAFETY INSTRUCTION
1. Make sure the solar battery has enough voltage for the controller to recognize it
type before first run.
2. The cable connecting the controller with the battery should be as short as possible
minimize losses.
3.The controller can only work with lead batteries: OPEN, AGM,
GEL. Not suitable for use with Nl-MH nickel metal hydride, NiCd and Lithium batteries
and others.
4.The charge controller is designed to work with solar cells only.
Never connect any other type of voltage source.

PRODUCT FEATURES
1.Built-in industrial microcontroller
2. Large LCD display with all adjustable parameters
3.Full 4-step PWM charging management
4. Short-circuit, anti-opening-circuit-overvoltage protection, against
overcharge, overload
5. Double Mosfet protection against reverse current. Low heat emission

CONNECTION
1. Connect the battery to the regulator, keeping the correct polarity (+ / -
2. Connect the solar cell to the regulator, keeping the correct polarity (+ / -)
3. Connect the receiver to the regulator, keeping the correct polarity (+ / -)
Hang up in the reverse order.
Incorrect sequence of operations may damage the controller

High-quality single-core cable for MC4 photovoltaic installations, with a soft tinned multi-core conductor, with insulation and sheath made of cross-linked halogen-free plastic.

The cable meets the requirements of the following standards:
The cable has been manufactured for solar applications.
It can be used both inside and outside buildings.

Technical data:
Technical data:
Cable length: 3m
Rated voltage: 0.6 / 1kV AC
Working voltage: 1.5kV DC, compliant with EN 50618
Insulation resistance: 1000 MΩ / km
Test voltage 50Hz: 3500V
Nominal cross-section of the conductor: 4.00 mm2
Cable outer diameter: 5.5 mm